Skip to main content

Review: Anker’s + RAVPower’s Solar Chargers refuel iPads and iPhones, so long as the sun’s very bright

For whatever reason, accessory companies commonly send out review samples of solar-powered Apple accessories late in the year — rarely if ever in July, when the sun is at its peak pretty much everywhere in the United States. So even though I’m a fan of solar power, my ability to make the most of these accessories is naturally limited by the modest sunshine available for testing. The wisest solar-powered accessories I’ve tested hedge their bets by storing energy in batteries that can be used (and wall-recharged) even when the sun’s not out. Others become worthless when the sun goes away.

Anker’s 21W PowerPort Solar Charger ($55) and RAVPower’s 15W Solar Charger ($50) are portable solar panels connected to USB ports. They’re extremely similar to one another, each hiding two USB ports in a pocket to the right of three solar panels. Unlike Solartab (reviewed here), neither has a built-in battery, so you can only use them when the sun’s out — and optimally, directly overhead. One strikes me as a slightly better pick than the other, but unless you live in a frequently sunny climate and have hours to spare under the sun, or plan to travel somewhere with sunshine and no wall outlets, there are better-priced and more practical ways to keep your devices fueled up…

Key Details:

  • Two highly similar solar chargers with twin USB ports, 3A output
  • Each is designed to fold open, revealing three solar panels
  • Useful in direct sunlight, spotty to bad results in weak/no sunlight
  • No battery pack or Apple cable is included; you’ll likely want both

Anker’s and RAVPower’s designs are so similar that they could have come from the same factory — each is a black canvas folio held closed with one strip of Velcro, measuring roughly an inch thick when folded. Four metal-reinforced holes in each charger’s corners let you attach carabiner hooks to mount the opened panel, most likely on the outside of a large camping/hiking backpack; RAVPower includes lightweight green and silver metal hooks, while Anker lets you supply them yourself if you need them, packing in a micro-USB cable.

Aesthetic differences between the units are modest. PowerPort Solar is taller and narrower, with around a 6″ by 11″ footprint when folded and an 11″ by 26″ footprint unfolded, while the 15W Solar Charger is 8.5″ by 10″ folded and 10″ by 32″ unfolded. Anker’s twin USB ports are in a single box that’s permanently attached to the inside of PowerPort Solar’s pocket, while RAVPower’s two ports dangle separately from cables within its pocket. Both companies expect that you’ll supply your own Lightning cables for use with Apple devices, and suggest that you tuck your device into the pocket to avoid exposing it to direct sunlight while charging; the pockets are unfortunately only large enough for an iPhone (or similarly-sized battery pack) at best, not an iPad.

Each product makes a disclosure that you’ll need bright sunlight to make it work, but Anker’s is a little more telling, with a smiley face next to a full sun, a “neutral” face next to a clouded sun, and a frowning face next to a raining cloud. RAVPower skips faces in favor of check marks and X’s, giving checks to both sunny and partially cloudy, and an X next to the raining cloud. My personal impression is that both companies are overly optimistic about their chargers’ ability to perform in partial sunlight.

As their wattages indicate, there are power output differences between the accessories. PowerPort Solar promises 2.4A output on either port, capped at 3.0A total with both ports, while RAVPower’s ports are 2A and 1A. This won’t matter for most iPhones or iPads, but if you’re using an old, power hungry iPad 3/4 or a new iPhone 6/6s Plus, you’ll find that power is compromised when two devices are charging at once. In either case, most iPad and iPhone users should expect that a single device will — under optimal sunlight — recharge in the same amount of time as with Apple’s wall chargers, which is to say 2 to 5 hours.

Unfortunately, my testing of both accessories was at best inconclusive. Used outdoors during what iOS’s Weather app called “mostly sunny” conditions, notably with brand new Apple and Anker MFi Lightning cables, each solar panel generated “this accessory may not be compatible” warnings — and didn’t charge its connected test iPad. Support pages suggest that this warning sometimes comes up when the cables are damaged or non-MFi, which wasn’t the case here. My impression is that “mostly sunny” (at least by local standards) actually falls into the frowning face or “X” category, contrary to both products’ somewhat more optimistic labeling. On a chilly November day, expecting the sun to recharge your iPhone probably just isn’t realistic.

That having been said, user reviews of both solar panels have been a lot more positive when strong sunlight is available, while reaching similar conclusions to mine when the sun’s impeded. A solution, of sorts, is to attach a battery pack to the solar panels rather than your device, so that any energy that’s captured from the panels gets stored somewhere. Additionally, while some people have suggested that both of the panels fall a little short of the peak output claims — each reaches around 2.8A rather than 3.0A under optimal sunlight conditions — that’s not surprising given similar fluctuations in even non-solar charging accessories.

While it’s hard for me to personally endorse any purely solar-powered solution given the realities of the climate I live in, I can understand the appeal of portable solar chargers for two key types of users — backpackers who need a way to keep their devices fueled during extended camping or hiking trips, and people who live in generally sunny climates. If I was picking between these options, I’d likely go with the Anker version based on its superior power output, and pair it with an affordable, high-capacity USB battery rather than keeping my iPhone or iPad attached to it for hours. Anker also makes a 15W version of PowerPort Solar that’s priced the same as RAVPower’s 15W version, if you want to save $5.

Manufacturers:
Anker + RAVPower
Prices:
$50 / $55
Compatibility:
iPads, iPhones, iPods, Apple Watches

More From This Author

Check out more of my editorials, How-To guides, and reviews for 9to5Mac here! I’ve covered a lot of different topics of interest to Mac, iPad, iPhone, iPod, Apple TV, and Apple Watch users. In addition to my popular guide to the best Apple Watch docks and stands, I’ve recently discussed how to safely prepare and wipe your iPhone for resale or trade-in, and how to get the best iPhone trade-in price to help buy an iPhone 6s, amongst many other topics.

FTC: We use income earning auto affiliate links. More.

You’re reading 9to5Mac — experts who break news about Apple and its surrounding ecosystem, day after day. Be sure to check out our homepage for all the latest news, and follow 9to5Mac on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our exclusive stories, reviews, how-tos, and subscribe to our YouTube channel

Comments

  1. Nick Donnelly - 8 years ago

    Nice the way the iPad in your pic is sitting there in direct sunlight. Good luck with that ;)

    • Jeremy Horwitz - 8 years ago

      Yeah, as noted in the review, the lack of iPad-sized pockets is just another reason these are less than ideal charging solutions. Best off pairing a battery with these chargers, if relying upon them at all.

  2. bigmcguire - 8 years ago

    I enjoyed your review! Thanks for taking the time to write it.

    I have the Anker 21 watt panels after owning the 14 watt Anker panels for quite a while. I wasn’t too happy with the 14 watt Anker panels as even all day in direct sunlight, they charged things slowly. When the 21 watt panels came out, I sold the old panels to help pay for the new panels. There is a noticeable speed difference in the 21 watt panels – I can charge my phone (iPhone 6+) as quickly as a wall plug in direct sunlight and actually charge my 26,800 brick vs 1-2 bars a day. However, I make sure to use 6 ft cables so I can keep my devices in the shade (back porch) and a slab of wood+bricks to keep the panels angled at the sun directly (morning/evening). I imagine most of my solar success is due to the fact that I live in the California high desert – very few trees, very few things to cause shade, and strong sun most of the time.

    The 21 watt panels take 6-8 hours of direct sunlight 10am – 4pm+ to charge my 26,800 mAh Anker battery brick half way. I don’t have a USB voltage meter device (need to get one). I know when my iPad says “cable not compatible” it just means it won’t charge while the iPad is turned on, I’ve noticed on my iPad Mini 2 I’ll get this if I have that AND my iPhone plugged into the panels, but if screen is off, they both charge (albeit slowly). So I only use my battery bricks in connection with the panel most of the time.

    I have these fun “solar” challenges where all my devices will live off my battery bricks (powered by solar) and stay “off the grid” for fun – for several weeks to a month at a time. Fun but requires a bit of work. Checking on the panels every few hours gets old too – doesn’t work well if I’m planning on going out and about on the weekends.