Skip to main content

How-To: Upgrade the SSD in your MacBook Air or Retina MacBook Pro, boosting size & speed

Over the past two weeks, I’ve written about the (surprisingly easy) process of adding solid state drives (SSDs) to radically speed up older iMacs, and the varied challenge levels of adding SSDs to older Mac Pros, Mac minis, and non-Retina MacBooks. Today’s guide looks at the easiest SSD installations of all: the MacBook Air and Retina MacBook Pro. A new SSD in one of these machines could have two, four, eight, or sixteen times the original storage, plus two to four times faster speeds.

Apple shipped most MacBook Airs and all Retina MacBook Pros with solid state storage, so upgrading these machines for extra capacity and speed is generally as simple as picking a new drive, then using two special screwdrivers during the installation process. Assuming your MacBook is old enough to be out of warranty — except for a few specific models — you’ll find that pretty much anyone can handle this swap with the right tools. Below, I’m going to show those tools to you, as well as the MacBook-ready SSDs that are worth considering…

The Big Picture

The original MacBook Air was designed with solid state memory as an option, not a mandate. Back in 2008, Air buyers could add a 64GB SSD for a whopping $1,300 premium over the ultra-thin computer’s normal price, and there was no consumer 1TB drive capable of fitting inside a laptop — a desktop 1TB SSD sold for $4,000. Today, the lowest-end MacBook Airs and Retina MacBook Pros ship with a 128GB SSD as standard; Apple’s 256GB SSD adds $200, versus $500 more for 512GB, or $800 more for a Pro-only 1TB SSD.

But those are Apple prices; third-party drives are much more affordable. Following some relatively straightforward guidelines, you can bump an original MacBook Air up to 128GB for $95, or enhance newer MacBooks for $170 (240GB), $300 (480GB), or $550 (1TB). Many MacBook Air and Retina MacBook Pro SSDs come with kits that help you transfer the contents of the old drive to the new one, open your computer, and keep the old SSD around as an external drive if you want it.

MacBook Air: Replacing Your Old Hard Drive or SSD

There are five key generations of the MacBook Air that use different types of solid state drives.

  1. First-generation 13″ MacBook Airs (sold between 2008 and mid-2009) can be upgraded to a 1.8″ SSD with a ZIF connector. On price, your best choice is a 64GB ($56) or 128GB ($95) KingSpec drive, each of which have a 4.4/5-star Amazon rating. Expect speeds in the 50-90MB/second range. Add this external enclosure for only $14 if you plan to keep using your old drive after the SSD swap, or want to ease the migration process from your old drive to the new one. [iFixit’s guide to this MacBook Air can be found here.]
  2. Second-generation 13″ MacBook Airs (sold between 2008 and mid-2009) can be upgraded to a 1.8″ SATA drive with between 120GB to 480GB of capacity. Other World Computing/OWC’s Mercury Aura Pro comes in 120GB ($134), 240GB ($218), or 480GB ($348) versions with promised read/write speeds in the 275-285MB range. [iFixit’s guide to this MacBook Air is here.]
  3. Third-generation MacBook Airs (11″ and 13″, sold between late 2010 and mid-2011) use blade-style SATA III SSDs that look similar to RAM boards. 9to5Mac’s Seth Weintraub added a $190 240GB Transcend JetDrive 500 SSD to his wife’s 2011 MacBook Air last year; the same drive now sells for $170 on Amazon, with a 480GB model at $300, and a 960GB SSD at $540. They promise 460-570MB/second speeds. OWC’s Aura/Aura Pro series for this particular MacBook Air has had comparatively poor reviews, but a 1TB OWC drive for the same computer can be had for $549 through Amazon. [iFixit’s guides for this 11″ Air and 13″ Air are here.]
  4. Fourth-generation MacBook Airs (11″ and 13″, sold starting mid-2012) should go with the 4.8/5-Star reviewed Transcend JetDrive 520 models (240GB/$169, 480GB/$299, 960GB/$540), which promise 460-570MB/second speeds. Mixed reviews of OWC’s 240GB Aura Pro ($239) and 1TB Aura 6G ($549) would give me pause. [iFixit’s guides for this 11″ Air and 13″ Air are here.]
  5. Fifth-generation MacBook Airs (11″ and 13″ sold starting early-2013) switched to faster PCIe SSDs, which are not yet being offered by Transcend or OWC for this particular laptop.

How easy is installation? Except for the older first- and second-generation MacBook Airs, the process is incredibly simple: you generally use a Pentalobe screwdriver to remove 10 screws from the Air’s bottom, then a Torx T5 screwdriver to unscrew one screw on the SSD. The JBtek $9 kit shown below includes both screwdrivers.

I personally use a regrettably discontinued version of iFixit’s Pro Magnetic Project Mat (shown below; it’s no longer made with these handy cutouts) to hold and organize the screws, but I’d call it completely optional. Similarly, iFixit’s $30 54-Bit Driver Kit may be overkill for this particular project, but it includes all the wacky screwdriver pieces you’ll need for other Apple projects.

Once you’ve lifted its bottom lid away from the rest of the housing, the MacBook Air is easy to figure out: the SSD is in the center, just above the central right battery pack. You need to make sure you’ve discharged any static before touching the internal components, and gently disconnect one battery connector off to the left of the SSD; iFixit’s guides contain the details.

At that point, swapping the SSD requires little more work than unscrewing this single Torx T5 screw, gently removing the old SSD, and then going in the opposite direction to replace the SSD, battery connector, one Torx screw, the bottom lid, and 10 pentalobe screws. That’s it.

The directions are far more complex for Apple’s oldest 13″ MacBook Air models: you instead need only a Phillips #00 screwdriver, but will have to pull 10 external screws, 13 internal screws, the full battery, and multiple cables before reaching the hard drive, then go in the opposite direction to close everything up. If you have one of these old machines, you’re probably best off seeking the services of a third-party Mac repair shop to do the SSD swap.

Retina MacBook Pro: Replacing Your SSD

There aren’t as many generations of the Retina MacBook Pro as there are MacBook Airs, so the choice between SSDs is simpler.

  1. First-generation 15″ Retina MacBook Pros (sold mid-2012 to early-2013) can use Transcend’s JetDrive 725 (240GB/$170480GB/$299, 960GB/$539), or OWC’s Aura Pro 6G (240GB/$249, 1TB/$588). Both come with the tools you’ll need to do the SSD swap, plus external enclosures; Transcend’s drives are more highly-rated (4.6/5 Stars on Amazon) than OWC’s. Expect 460-570MB/second speeds from these drives. [iFixit’s SSD replacement guide is here.]
  2. First-generation 13″ Retina MacBook Pros (sold late-2012 to early-2013) can use Transcend’s JetDrive 720 (240GB/$169, 480GB/$299, 960GB/$539), or OWC’s Aura Pro 6G (240GB/$2491TB/$588). Both come with the tools you’ll need to do the SSD swap, plus external enclosures; Transcend’s drives are more highly-rated (4.6/5 Stars on Amazon) than OWC’s. Expect 460-570MB/second speeds from these drives. [iFixit’s SSD replacement guide is here.]
  3. Newer-generation 13″ and 15″ Retina MacBook Pros use newer SSDs with faster PCIe connectors. As of early 2015, no third-party SSDs are compatible with this standard, but we’re expecting to see options hit the market closer to the middle of the year. Some Retina MacBook Pro SSDs will apparently be capable of achieving speeds in the 1.2GB/second range, compared with the 700-800MB/second speeds of stock drives.

For the 15″ Retina MacBook Pro, SSD replacement is virtually identical to the newer MacBook Airs: dead simple, with 10 undercarriage screws, a battery connector, and one interior screw to remove. As noted above, the Transcend and OWC kits come with the screwdrivers you’ll need, as well as external drive housings to help you migrate your files. The original 13″ Retina MacBook Pro requires quite a few additional steps; Apple significantly simplified the SSD replacement process for subsequent-generation 13″ machines, bringing them to parity with the 15″ model and MacBook Airs.

Preparing Your Software/Copying Your Old Drive To Your New SSD

As noted above, most of the SSDs sold for the MacBook Air and MacBook Pro can be purchased with external enclosures, which optionally lets you format the SSD and set it up before you install it in your computer. You can use a complete drive cloning app to just transfer your old drive to your new one, or run a complete Time Machine backup to another external drive, then restore the backup’s contents to the freshly formatted MacBook Air/Pro after rebooting with Time Machine.

If you bought a kit with an external enclosure, place your new SSD inside the enclosure, and connect the enclosure to your MacBook with a USB cable. Then run SuperDuper or Carbon Copy Cloner (shown above) to transfer the old drive’s contents to the new drive. This will let you start using your MacBook Air or Pro right away after the drive is swapped, without waiting hours for Time Machine. For better or worse, this guarantees that every one of your files (and potentially plenty of cruft) will be exactly where it was before.

In my opinion, going the Time Machine route is a better idea when starting fresh with an SSD, and it costs nothing. After backing up your MacBook with Time Machine, you just turn off and unplug your laptop, swap the drives, then hold Command-R down on the keyboard when first restarting the computer. Any recent version of OS X will boot into Internet Recovery mode, enabling you to use Disk Utility to format the SSD (choose Mac Extended + Journaled), then restore directly from your Time Machine backup. The restoring process will take hours, but you’ll come back to a fresh installation of OS X with everything pretty much as it was left on your old drive.

What About Trim?

On my previous SSD upgrade articles, readers asked about Trim support for third-party SSDs, a topic that’s both important and potentially somewhat confusing. Trim — automatic recycling of SSD space freed up by deleting files — is a background task performed by your Mac. It’s handled in the background by OS X, though for reasons unknown, Apple generally provides Trim support only for its own drives. Transcend’s free JetDrive Toolbox software enabled Trim support for Macs before Yosemite, but the feature is currently disabled for Macs running Yosemite.

Cindori’s free application Trim Enabler (Pro version $10) enables Trim support for third-party SSDs under OS X, including the latest 10.10.2 and 10.10.3 versions of Yosemite. Please note, however, that Trim Enabler must be turned off each time you do a OS X system update (say, from 10.10.2 to 10.10.3); if you forget, you’ll see a gray box when the machine tries to reboot after an update, and you’ll need to follow these instructions to make the machine work properly again.

Conclusions

Swapping your MacBook Air’s or Retina MacBook Pro’s SSD is generally a pretty easy process, and the benefits are obvious: you’re virtually guaranteed to enjoy much more storage capacity, and under the right circumstances, you’ll see a nice speed bump, too. Most of the MacBook Air models mentioned in this article can at least double their speeds with newer SSDs, and if you’re willing to spend a little bit more, you’ll have enough storage space to keep your MacBook in active use for years to come.

If you want to consider external storage solutions instead, check out our guide to MacBook, Mac mini, and Mac Pro SSDs. This earlier guide to swapping your iMac’s old hard drive for a fast new SSD is great for upgrading Apple’s larger all-in-one machines, too.

FTC: We use income earning auto affiliate links. More.

You’re reading 9to5Mac — experts who break news about Apple and its surrounding ecosystem, day after day. Be sure to check out our homepage for all the latest news, and follow 9to5Mac on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our exclusive stories, reviews, how-tos, and subscribe to our YouTube channel

Comments

  1. Leif Paul Ashley - 9 years ago

    Very cool… and I see one of those iFixit mats in my future.

    • Jeremy Horwitz - 9 years ago

      iFixit contacted us right after the article was published to note that they changed the mat and removed those useful cutouts. The current version is apparently the same as a magnetic mat sold by Delcast for a much lower price.

  2. Taste_of_Apple - 9 years ago

    This is great. Definitely can really improve the speed and performance.

  3. bmc553 - 9 years ago

    Does this void the warranty if I have apple care?

    • Jeremy Horwitz - 9 years ago

      It would – self-swapping is suggested only for computers old enough to be out of warranty.

  4. Just a heads up, but that exposed battery is EXTREMELY dangerous. Please add a warning of some kind, because you can easily cause a fire by one wrong move of the screwdriver. Kind of surprised yall wouldn’t have mentioned that!

    • Ryan (@Crankturner) - 9 years ago

      Easy there chief, it’s low voltage. It would, at most, cause a tiny itty bitty spark. Not a big deal. I’d be more worried about component safety than fires! lol, sheesh.

      • Kyle Gp - 9 years ago

        He’s talking about piercing a cell causing it to catch fire and vent toxic smoke.

  5. “As of early 2015, no third-party SSDs are compatible with this standard”

    And this?

    https://it.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-and-15-Inch-Retina-Late-2013-Mid-2014-SSD/IF123-026-1

    • Jeremy Horwitz - 9 years ago

      They’re not actually in stock for purchase, and seemingly pre-listed using photographs of the SanDisk drives found inside newer Macs. Used drives can be harvested from otherwise damaged MacBooks and resold.

  6. varera (@real_varera) - 9 years ago

    One has to mention driver (kext) signature issue with Trim Enabler on Yosemite. Somehow authors forgot that.

    To use Trim Enabler one has to compromise core security settings on OSX, Yosemite only. Tiny little negligible detail.

  7. Chris V Regulus - 9 years ago

    Reports, forum postings, number of people with RECURRING OWC’s Aura/Aura Pro series failures suggest that their failure rate MUST be over 30% to get so multiple returns (statistically, Apple is likely less than 0.005% because they use Samsung/Toshiba etc top notch. Or, top notch such parts cost quite a bit more than OWC charges. Read the forums, reviews, reviewers on youtube home lost 2 OWC drives in 2-3 months, and the headache those that keep returning the 3d party drives go through.

  8. Joel Reeves - 9 years ago

    there is a date gap in your descriptions of third and forth generation Macbook Air. I think the 3rd gen Airs were sold until summer 2012 when 4th gen became available

  9. Sebastian Bagiński - 9 years ago

    I currently have Transcend JetDrive 720 480GB installed in my Retina MacBook Pro 13″. Thanks for bringing it up that JetDrive Toolbox doesn’t work for Yosemite anymore, didn’t know that.

    So does that mean I have to use TRIM Enabler so my drive wouldn’t degrade?

  10. Kevin Erickson - 9 years ago

    What cases can we use with the Apple SSD? My computer just died and I want to find out how to put the SSD into an external case.

    • thewinelake - 9 years ago

      I think you’ll find that stock drives in MacBook pros have been doing 1200m/s since 2014 (15″) and 2015 (13″). Can’t wait for third party 1TB+ options though…

  11. Mykii Liu (@mykiiliu) - 9 years ago

    Any ideas about which Apple SSD’s will swap into other Apple devices? The only one that I’ve tried is the 2014 Mac Pro SSD to 2014 13″ MacBook Pro with Retina display.

  12. Are there SSDs for late-2014 MacBook Pro Retinas yet? Also, I have a refurb, but didn’t get Apple Care. Should I do that before the 1 year warranty is up? Thanks.

  13. E.j. Parcasio - 9 years ago

    When do you expect they’ll come out with a SSD upgrade for the 2015 macbook pros 13 inch?

  14. BRΞNT (@Brent_F1) - 9 years ago

    Dumb Q of the day, but I have a new MacBook Pro 13″ RETINA … and with no 3rd party SSD drive options currently available, I hear that I can use the SD slot for external (internal) ‘storage’ though, correct?

    I currently only have 128GB thinking I could swap it later for a 500GB to 1TB for loads less £’s than Apple… Sadly, I see now that with the new retina cases/connections, that this is not an option (as of July 2015) – But I’m only 5 weeks into owning this (over my now dead 2009 MBP15) and need to store pix, music, videos, and Adobe PSD files ‘somewhere’ to free up room for basic OS X system operations….

    Point is, can someone point me in the right direction to a 3rd party SD solution that’ll allow me to ‘plug in’ some additional storage at a reasonable cost?

    This is my first computer that is “SSD only” – and whilst I understand the reasons for the current limitations – I kinda wish Apple had left at least ONE new retina model with a HDD drive option to swap out or upgrade later…. :( But since those days seem to be long gone now, and am already out of space, I need a fast fix for additional storage.

    (I’ll also add this dilemma to consider too) – I don’t store allot of video files for obvious reasons, but do download 3-5 BBC programmes weekly that chew up 10-20GB depending on show length and the quality I select – Point being, I recently tried to save a 3GB HD show to a thumb drive thinking that’d solve my problem, just to get an error message from BBC iPlayer saying that I can’t save shows (files) to an “external drive” … *sigh* – So that then begs the question, if I do find say a 300GB-500GB 3rd party SD drive to ‘plug in’ will BBC balk at this too?

    Thanks in advance for any fruitful suggestions –

    BB

  15. George Laufert - 9 years ago

    If you are like me, the biggest space hog on your SSD are your photos. A cheap alternative with Yosemite 10.10.3 and above is Photos and the iCloud. So far it is working OK for me. I previously used an external drive to store my iPhoto library. Now all my photos are available on my Air, iPads and iPhone. One drawback is, when importing/exporting large numbers of files, that it will slow your internet down to a crawl and make your VOiP unruly. Of course this depends on the size of your pipe.

    • Joseph Richardson - 9 years ago

      I myself would love to do that but problem is iPhotos and the new photos app downgrade the quality of DSLR photos which is a massive issue

  16. Alexei Kositsin - 9 years ago

    Hey all
    Will JetDrive 720 work on macbook pro 13 2015?!
    Cannot find any upgrade. This one seems to have same connector.

    I need it badly. Please advice.
    10293810293 Thanks in advance.

  17. Timo Genzen - 9 years ago

    I have a MacBook Pro 13″ Retina Early 2015 with 256GB. I want at least 500GB, better 1TB. Do you have an update for me?

  18. Is there a reader for the SSD Drive or some adapter? The laptop was completely crushed..I am able to salvage the drive..but I need something new to read it from another computer?

  19. Bryan MacKinnon - 8 years ago

    I took the easy way out to expand the SSD disk storage on my MacBook Pro 15″ Retina (late 2013). I purchased it with 512GB but in hindsight, I should have purchased it with 1TB. Not finding a consensus on the web whether these newer MacBooks SSD’s are upgradable, I decided not to risk it. So I found a reasonably fast external SSD to plug into one of the never used thunderbolt ports (a LaCIE Rugged 512GB). I currently use it to store large games and backups from my iPhone and iPad which can be sizable but other things such as photos would work too. The main disadvantage of course is that I have to carry around a small external drive should I want to access what’s on it. I had to do a bit of basic Unix symbolic linking to point to the external drive. For example, for my iOS backups, in the “~/Library/Application Support/MobileSync” folder, I created a symbolic link “Backup -> /Volumes/LaCie500GB/iOSBackups”.

  20. Wesley Franks - 8 years ago

    I appreciate this article, and thank you for making this. I have read a few of your articles. Greatly appreciate it.

  21. Manuel José Carvajal - 8 years ago

    I have a late 2013 15″ Retina MacBook Pro with 1 TB SSD drive and it’s almost full. Is it possible to increase the size of the internal SSD of this model and if so, how?

  22. Doni Kurniawan - 8 years ago

    where can I find an SSD drive for Macbook pro retina display early 2015 ?

  23. pjohnn - 7 years ago

    Hello! I don’t know if you guys still reply to this.. But anyways, is this possible on a Macbook Pro mid 2014 edition? I heard somewhere that SSD is attached to the motherboard and what not.

    Thanks!