Drive bay Stories April 18, 2016

The National Association of Broadcaster’s trade show in Las Vegas is in full swing, and several prominent hardware makers have unveiled new Thunderbolt 3-equipped tools. Although there are no current products in Apple’s lineup that support Thunderbolt 3, it’s widely assumed that such hardware, made possible by Intel’s Skylake microarchitecture, is in the pipeline.

The folks over at Lacie, Promise, and CalDigit have all revealed new Thunderbolt 3 products at NAB 2016, bringing high bandwidth and high-capacity storage solutions to market.

expand full story

Drive bay Stories May 12, 2011

via some Dutch Dude who didn’t have any issues installing an SSD in the Hard drive Bay

According to a blog post at OWC, the new iMacs have a temperature sensor in their hard drives which will restrict replacing with non-Apple hard drives.

For the main 3.5″ SATA hard drive bay in the new 2011 machines, Apple has altered the SATA power connector itself from a standard 4-pin power configuration to a 7-pin configuration. Hard drive temperature control is regulated by a combination of this cable and Apple proprietary firmware on the hard drive itself. From our testing, we’ve found that removing this drive from the system, or even from that bay itself, causes the machine’s hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT).

Here’s the thing though:  What if you order an iMac without a hard drive?  One iMac option is just the SSD which is mounted on the optical drive?  Perhaps there is a way to disable fans altogether and thats what ships with SSD-only iMacs?

Clearly some more investigative work is necessary.

expand full story

Sylvania HomeKit Light Strip

Powered by WordPress.com VIP