Apple’s iPhone 6 announcement is close, and that means the leaks are coming in at an even quicker pace. New photos reveal possible iPhone 6 components and may answer a burning question about the device’s camera setup. If previous rumors and leaked schematics are true, it looks like Apple’s next generation iPhone will still ship with a True Tone flash…
Last week, YouTuber Marques Brownlee got his hands on what is claimed to be a sapphire glass panel from Apple’s upcoming iPhone 6. The initial video (found here) put the panel through a variety of torture tests including, knives, keys, and even a flexibility test to show off the panel’s durability. While there were no scientific tests performed to prove the front glass is actually sapphire, the result of each test was very impressive. Well, apparently that wasn’t enough…
A new video published by TLDToday closely examines an iPad 6 dummy unit created around rumors and speculation. The video shows off some design changes and the notable addition of a Touch ID ring. At this point in time, there’s no official news on Apple’s plans to include Touch ID with the upcoming second-generation iPad Air, but it would definitely make sense.
In the video below, the iPad Air is compared to this rumored “iPad 6” dummy showing very small changes between the two. At first glance, the dummy appears to be thinner than the current generation iPad Air, but as we’ve seen in the past these dummy units aren’t exactly 100 percent accurate…
Recent rumors have suggested that Apple’s upcoming 5.5-inch iPhone 6 will now launch alongside the 4.7-inch iPhone later this year. A larger 4.7-inch display may be the sweet spot for a lot of users on both iOS and Android, but 5.5-inches is definitely up there in phablet territory.
Unsurprisingly, mockups of the 5.5-inch iPhone 6 have recently surfaced, and when compared to the 4.7-inch mockup or other 5.5-inch Android devices, it’s clear that this will be a massive iOS device. But how big is too big? If Apple plans to launch a device of this size, there are a few design changes that need to happen. Check out our comparison video for a closer look at the large 5.5-inch iPhone 6 mockup…
With all of these changes in mind, what does the general public think of this rumored iPhone 6 design? YouTuber UrAvgConsumer hit the streets of NYC with one of the iPhone 6 dummy units similar to the ones we’ve previously covered and asked random strangers what they thought about it. The video presents mixed opinions about the alleged design, but for the most part everyone’s initial reaction was “wow.”
<a href="http://9to5mac.com/2014/05/19/this-is-what-ios-looks-like-on-a-4-7-inch-iphone-6-display-video/">Full video below</a>
Over the past couple of months, it’s been rumored that Apple’s iPhone 6 will feature a larger 4.7-inch display. Several mockups and schematics have appeared online that mimic this rumor, but we won’t have confirmation until Apple announces the iPhone 6 later this year.
Instead of waiting for the rumors to be confirmed, we thought it would be fun and useful to create a physical iPhone 6 simulator. Doing so, would give us an idea of what iOS would look like if it were running on a 4.7-inch display…
Lately, there has been a storm of rumored iPhone 6 images, renders, schematics, and videos. We’ve seen just about everything that the rumor mill has to offer at this point. All of the mockups that have been floating around may not match up with Apple’s official iPhone 6 design, but they are definitely convincing to an extent.
We recently put together a video comparing an iPhone 6 mockup to the iPhone 5s and fifth generation iPod touch, but what about Apple’s other iOS devices? In the video below, we compare this alleged iPhone 6 design to the iPad Air, iPad mini, iPhone 4/4s, iPhone 5s, iPhone 5c, and iPod touch. Hopefully this massive comparison will put an end to any other questions regarding the rumored iPhone 6 design, but based on the mockup units we’ve obtained the iPhone 6 is going to be a very large device and possibly feature a sharper 1704 x 960 resolution display.
Based on all of the iPhone 6 dummy units we’ve seen, this rumored design closely resembles Apple’s fifth generation iPod touch, but that’s not all. As shown in the video below, the alleged iPhone 6 design looks very similar to another flagship smartphone released this year.
The HTC One M8 and iPhone 6 mockup look like cousins or long-lost brothers when it comes to their design. Of course there’s no confirmation that Apple is actually using this design for the iPhone 6, but almost all of these mockups have been manufactured based on “leaked” schematics and specifications.
We’ve recently obtained two iPhone 6 mockups in Gold and Space Gray and have put together a video comparing them to Apple’s iPhone 5s, fifth generation iPod touch, and the alleged iPhone 6 cases we’ve previously covered. We’ve seen quite a bit of news surrounding these dummy devices, but most of the time, the photos aren’t the best and we’re left wanting more information and details.
This isn’t the first time we’ve seen rumored schematics for Apple’s upcoming iPhone 6, but this time we’re presented with a detailed set of 3D renders. These images are claimed to be the source of design for all of the recent dummy iPhone 6 units that we’ve reported on, and allegedly, from a supplier based on Apple’s design.
We’re a bit skeptical of these renders, as anyone should be when dealing with these types of leaks. These images were originally obtained by the Wei Feng network (via G4Games) from “informed sources.” These alleged 3D schematics include dimensions and look very similar to all of the mockups that we’ve seen in the past.
A new set of photos published by Italian site Macitynet, compare Apple’s fifth generation iPod touch to the widely rumored iPhone 6 design. The photos clearly show the design similarities between these devices, but keep in mind, this “iPhone 6” is just a mockup. Don’t mind the screen on this dummy, it’s just a sticker. By now, we’ve seen just about every mockup and comparison possible (even a gold version), making these kind of photos a little less exciting each time.
Another day, another dummy. We’ve recently obtained new images showing what appears to be a gold iPhone 6 mockup pictured next to the other two color variations that Apple currently offers. As mentioned, this is definitely a dummy model, but it’s also the first time we’ve seen a gold one.
Here’s your daily dose of iPhone 6 mockups. This time, images of a white/silver iPhone 6 dummy have been posted on Chinese website Baidu. The images don’t reveal anything exciting or new, but they may give you a better idea of what could be coming later this year.
The video below compares the case’s design to the iPhone 5s, Nexus 5, and Samsung Galaxy Note 3. Surprisingly, the case’s layout almost lines up perfectly with Google’s Nexus 5, which gives us a good idea of the iPhone 6’s overall form-factor if the leaked specifications used to manufacture this case are correct.
We’re still months away from Apple’s expected announcement of the iPhone 6, but ambitious manufactures are already designing accessories based on current rumors. Additional silicon cases rumored to fit the iPhone 6 were recently published on NoWhereElse and provide a closer look at some of the device’s possible design changes.
The case pictured above has slightly rounded edges, similar to the 5th generation iPod touch or iPhone 5c, and are consistent with previous rumors. As we’ve seen in recent accessory leaks, the case also features a repositioned power button and thin oblong volume buttons similar to an iPod touch. It has also been rumored that Apple’s iPhone 6 will feature a larger 4.7-inch display.
Businessweek covers a talk given by Apple (and former Google) board member Bill Campbell who “held court” on Friday at the Mountain View headquarters of Intuit, where he serves as chairman. Notably, he discussed former Apple execs Tony Fadell who now runs Nest and Ron Johnson who just got fired from JCPenney. Of Nest, he pre-announced new products, saying
“You would think that people would yawn at something as boring as a thermostat,” Campbell said. “So, I’ve been surprised at how it has done and is doing. It will be the first of many products that come out of that company, which has a brilliant CEO and engineering team.”
Of Ron Johnson‘s exit at JCP, he said, “You have to keep your current business going while you experiment with a new one. He didn’t do that. He just put a bullet hole in his current business.”
GOOD ADVICE.
But perhaps most interesting for those yearning for an iWatch, Campbell told the business software company Expand Expanding Close
Apple.pro recently leaked spy shots of the purported iPad 3 front glass and a next-generation iPod nano with a camera on the back. Today, the Chinese blog is at it again, pointing to an image depicting the thickness of the third-generation iPad’s shell compared to the current-generation iPad 2. Resorting to a good ol’ digital caliper, the photograph reveals iPad 3 to be 9.50mm thick.
Compare this to iPad 2’s depth of 8.8mm (the original iPad is 13.4mm), and the third-generation iPad could end up a hair thicker than its predecessor could. Or, if we are really nitpicking, it is 0.81mm thicker. It would seem there is some merit to that talk of a slightly thicker iPad 3 with more tapering and narrower bezel. Apple is likely to unveil iPad 3 at a media event next March 7.
According to sources that spoke with 9to5Mac’s Mark Gurman, at least three next-generation iPads are expected. It is speculated iPad 3 would run a dual-core A5X chip with an improved graphics engine. This chip is said to be an evolution of iPad 2’s A5 processor and not a major upgrade that the rumored quad-core A6 silicon is expected to be. Near-immediate availability is being mulled for iPad 3 as shipments were spotted landing at ports of multiple countries around the world.
iPad 3 parts are supposedly cropping up all over China. Following yesterday’s spy shots of a purported iPad 3 enclosure (here and here), Japanese blog Macotakara today published the above photo allegedly depicting a high-resolution panel manufactured by Sharp. According to the blog, the part was obtained by parts reseller Eye Lab Factory, which means take this with a few pinches of salt. It looks like 9.7-inch panel, and Macotakara said its flat cable corresponds to a similar cable connecting the iPad 2’s LCD panel to the motherboard.
The display is said to be a XQGA variety equaling 2,048-by-1,536-pixel resolution. Macotakaraclaimed last month that Foxconn and Pegatron Technology began assembly of next-generation iPads for an early March launch (and iLoungeconcurs). Unnamed sources also told Macotakara that Sharp would supply 2048-by-1536 resolution panels for iPad 3, which is a notion in line with earlier reports by DigiTimes and the Wall Street Journal. Meanwhile, another source revealed new iPad 3 replacement parts….
Digitimes has published an interesting report this evening, saying Apple will begin the production of a 7.85-inch iPad in Q2 2012. Apple will reportedly begin selling the smaller iPads prior to Q4 2012, but will also sell another iPad in Q1 2012 — presumably the iPad 3.
Apple is likely to launch a 7.85-inch iPad prior to the fourth quarter of 2012 in addition to a new iPad scheduled to be released at the end of the first quarter, according to sources in the supply chain.
In order to compete with Amazon’s Kindle Fire — which has been selling very well — Digitimes says their sources say Apple has been persuaded to manufacture the 7.85-inch tablet to compete.
However, in order to cope with increasing market competition including the 7-inch Kindle Fire from Amazon and the launch of large-size smartphones from handset vendors, Apple has been persuaded into the development of 7.85-inch iPads, the sources indicated.
LG Display and AU Optronics will reportedly be the manufacturers for the 7.85-inch panels, and will hit the supply streams in Q2 2012.
Digitimes previously reported that manufacturers have already begun preparing for production of the iPhone 5 and iPad 3, which would be unveiled in September and reach customers as early as October. Now, adding more weight to these claims, Macotakara is reporting that an iPhone 4S variant along with a new iPad will arrive in the same timeframe.
According to the rough translation, it appears sources have provided information on a possible iPhone 4S based on the current CDMA iPhone 4. The report doesn’t rule out an iPhone 5 saying it “can not be confirmed”. It also briefly suggests a new iPad will be released in October as well. Could it be possible Apple is planning on releasing an iPhone 4S as the rumored entry-level model in addition to an iPhone 5?
Of course the mention of a new iPad is less than likely. Apple appears to be quite a long way from releasing a refreshed model, especially if you are counting on them including those new 28-nanometer, TSMC-built A6 chips that just started trials. Expand Expanding Close
According to a report (via MR) from The China Times, the iPhone 5 will launch the second week of September (6-15), and the iPad 3 launch will be delayed until Thanksgiving due to component issues. This iPhone 5 report lines up nicely with reports from Reuters regarding a September launch and an earlier report saying right after Labor day (Sept 5th).
If a September launch were to be the case, we assume the iPhone 5 would be announced at Apple’s annual music event in September. Obviously, iOS 5 would accompany it. The China Times’ report regarding a fall launch for the iPad 3 trails behind with what we’ve already heard.